Transparent Acrylic Case Shell Enclosure Gloss Box For Arduino UNO R3-Good quality

The screw holes on uno are big for the screws given with the case

decent case. more spacers should have been provided to ensure no metal screws are in contact with the board.
One downside is the opening for the USB power is not at the right height, so you have to be careful not to tighten the screws too hard on this corner. Simple solution is to file the opening about 2mm. Otherwise the case is good, if u have another pair of hands to help you assemble it will be quite easy. For this price cant complain much.

Everything in the box. The case was so clear that I didn’t want to touch it with my bare hands. Not so easy to assemble it though.

I have not recieved all screws, because of this arduino is not fixed properly inside the case but overall good product

decent case for lack of other options, esp at this price point, or any. But terribly fidgety to assemble, and has to be assembled in proper sequence of parts or you will find yourself having to unscrew and rescrew things.
My final approach (I bought 3 so had to live with that)
– Peel off protectives
– Flip base piece upside down, insert screws and *tape over heads* so they don’t fall out when you flip the base piece right-side up
– insert the port-side wall cover into the base piece
– insert spacers over screws, and the Arduino over that, and add nuts, *fitting the port-side wall in place*
– tighten nuts because you can’t access them later
– add remaining wall pieces and top cover, and screw into place